1911 Auto Front Sight Staker Swage Point (870 / 1100 & F.s. Staker) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

Last updated: 2018-06-17







HOME PAGE PRODUCTS





1911 Auto Front Sight Staker Swage Point (870 / 1100 & F.s. Staker) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

1911 Auto Front Sight Staker Swage Point (870 / 1100 & F.s. Staker) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle




Makes Front Sight Staking Effortless, Faster And Far More Accurate. Improved, Offset Punch Design Efficiently Directs The Full Force Of The Hammer Blow Downward Against The Sight Tenon. Hardened, "v"-shaped Tip Easily Displaces Both Wide And Narrow Tenons For A Great-looking, Tight-fitting Front Sight That Won't Shoot Loose. Large, Square Shaft Is Easier To Hold, See And Hit So There's Less Chance Of A Missed Hammer Blow Striking Your Customer's Expensive Slide.

Check Out The video Demonstration Of The 1911 Auto Front Sight S specs: Steel, Blued. 5/16" (7.9mm) X Β½" (12.7mm) X 4β½" (11.4cm) Long Shaft. Replaceable, Hardened Steel Tip. Fits 1911 Auto. Includes Complete Instructions.

Indicative Price: USD 15,99
(for Actual Current Price, possibly lower,
please click below)

Availability: In stock while stock lasts.
Condition: BRAND NEW


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:
    Fillister Head Screw Kit 5-44 X 1" Fillister Screws, Pkg 12 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Fillister Head Screw Kit 5-44 X 1" Fillister Screws, Pkg 12 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 5,39 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    With This Kit You Can Stop Searching For Those Hard-to-find Screws That Are Stocked By Only A Few Specialized Manufacturing Supply Houses . . . We Have Done The Looking For You. You Can Have That Β€œjust Right” Screw Right at Your Fingertips, In A Handy, Very Complete Kit . . . And at Quite A Substantial Savings.the Kit Contains 12 Each Of The...
    More....

    Winchester / marlin Screwdrivers Bits Only for Marlin 336 Scrwdrvr Set : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Winchester / marlin Screwdrivers Bits Only for Marlin 336 Scrwdrvr Set : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 10,16 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    On The Bench Or In The Field, You’ll Have The Right Screwdrivers For Your Gun In One Compact, Go-anywhere Package. We Precisely Matched Each Gun’s Screws To The Correct Magna-tip⮠Bits To Give You The Best Possible, Blade-to-slot Fit. Except Where Indicated Otherwise, Each Set Comes With A Magnetic Socket, Hollow Handle For Easy, On-board...
    More....

    Acra-coat-wood Replacement Nozzles B, Pkg 12 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Acra-coat-wood Replacement Nozzles B, Pkg 12 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 2,5 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Gives Wood And Plastic Stocks A Durable, Weather-proof Finish. Not A One-shot Wonder Finish, But One You Apply In Multiple, Thin Coats Until You Reach The Desired Luster. Resists All But The Most Aggressive Bore Solvents. Normal Cure Time, One Week, Shortened By Warming Stock To 90β° F. replacement Nozzle - The Easy Solution For Clogged Nozzles.
    More....

    Revolver Barrel / frame Taps and Dies Gp-100 Frame Tap (.625-24) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Revolver Barrel / frame Taps and Dies Gp-100 Frame Tap (.625-24) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 67,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Custom Made To Our Specs To Fit The Oddball Threads On S&w K, L And N, And Ruger Gp-100 Barrels/frames. Absolutely Essential When Rebarreling, Whether You're Installing Factory Replacement Or Custom Bull Barrels. Perfect For Cleaning Up Dinged Or Damaged Threads. specs: High Speed Steel. colt Single Action, .695" - 20 Thread, 1-β½"...
    More....

    1911 Field Tool Kit Tool Tender Iii Tool Box : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    1911 Field Tool Kit Tool Tender Iii Tool Box : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 16,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    six Critical Tools To Do Field Maintenance, Improve Performance, And Assist In Assembly/disassembly On Your 1911 Pistol. The Heavy-duty Tool Box Provides You A Convenient Way To Haul The Tools To Matches Or Wherever You Take Your 1911.
    More....

    1" Nylon / brass Hammer 156001 1" Nylon / brass Hammer Combo : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    1" Nylon / brass Hammer 156001 1" Nylon / brass Hammer Combo : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 19,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    This Combo Is So Perfect For So Many Jobs Around The Gun Shop And On The Range, It's Impossible To List 'em All. Nylon Head Resists Breaking, Won't Mar Metal. Solid Brass Is The Basic For Gunsmith Use With Punches And More. specs: 1" (2.5cm) Diameter Faces. 11½" (29.2cm) Hickory Handle. Weighs Approximately 6 Oz. (170.1g).
    More....

    Room Temperature Nickel Stripper Brownells Roomtemp Nickel Stripper Kit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Room Temperature Nickel Stripper Brownells Roomtemp Nickel Stripper Kit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 59,95 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Convenient, Easy-to-mix And Use Liquid Completely Removes Both Electrolytic And Electroless Nickel From Steel, Copper And Copper Alloys Without Heating Or Agitation. Safe And Simple To Use; Usual Stripping Time Is 30 Minutes To 4 Hours. Re-bottle And Use Again And Again. Gives Off Strong, Ammonia Order, Use With Adequate Ventilation.
    More....

    Brass Pilots .22 Cf Rifle Muzzle Brass Pilot : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Brass Pilots .22 Cf Rifle Muzzle Brass Pilot : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 31,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Hardened Steel Pilot Keeps Facing And Chamfering Cutters Properly Centered In The Bore. Resists Wear For Years Of Service. specs: Brass. 1βό" (3.2cm) Long. .45 Acp Pilots - .45 Acp-1 Fits S&w Model 25 & 625. .45 Acp-2 Fits Colt 1917.
    More....

    Rust and Blue Remover Brownells Rust Remover Gal. : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Rust and Blue Remover Brownells Rust Remover Gal. : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 84,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    There Are Many Times When The Use Of A Good Rust Remover Is Called For During The Bluing Operation - Old Time Guns Too Fragile To Polish - Guns That Have Been Badly Neglected And Are Not Worth Spending Enough Money On To Warrant A Good Polishing Job - And Guns So Badly Rusted It Would Take Too Much Valuable Time Trying To Buff Off All The Rust And...
    More....

    90\ Chamfer Cutter Facing Cutter, 90 Degree, .540 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    90\ Chamfer Cutter Facing Cutter, 90 Degree, .540 : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 52,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Another Ron Power "trick-of-the-trade". Use To Adjust Barrel/cylinder Gap, Square The Rear Barrel Face And Eliminate High Spots. Four Sizes: .540", For Ruger Security Six, Gp-100; S&w K; Colt Mk Iii, Official Police; Charter Arms; .560", for S&w L; .625", for S&w N; Ruger Blackhawk, Super Blackhawk; .687...
    More....

    Acra-quick? & Acra-20? Acra-quick Kit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Acra-quick? & Acra-20? Acra-quick Kit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 41,95 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Acra 2-part Epoxies Are Truly Revolutionary In Terms Of Strength, Hardening Time, And Their Ability To Bond To Almost Any Material. Specially Formulated, Clear Drying, Resin/hardener In A 1-to-1 Ratio, Sets And Cures Fast For Rock Solid, Virtually Invisible Repairs Every Time.
    More....

    Brass Pilots .50 S&w Cyl Revolver Brass Pilot : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Brass Pilots .50 S&w Cyl Revolver Brass Pilot : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 25,95 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Hardened Steel Pilot Keeps Facing And Chamfering Cutters Properly Centered In The Bore. Resists Wear For Years Of Service. specs: Brass. 1βό" (3.2cm) Long. .45 Acp Pilots - .45 Acp-1 Fits S&w Model 25 & 625. .45 Acp-2 Fits Colt 1917.
    More....

    Spray Grit Brownells Gray Spray Grit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Spray Grit Brownells Gray Spray Grit : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 9,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Now You Can Instantly Add Extra Grip To Any Rifle Or Pistol Stock Without Machining Or Baking. Epoxy-base Makes It Long Wearing And Water- Proof. Sticks To All Properly Prepared Fiberglass, Wood, Aluminum, And Metal Surfaces And Dries In Only Minutes. Round-shaped, Synthetic Grit Particles Have Absolutely No Sharp Edges So They Can't Cut Or Abrade...
    More....

    Fixed Blade Gunsmith's Screwdrivers? No. 8 Fixed Blade Screwdriver : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Fixed Blade Gunsmith's Screwdrivers? No. 8 Fixed Blade Screwdriver : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 11,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    We're Tickled As All Get Out To Offer Our Fixed-blade, Gunsmith's Screwdriver Set Designed And Developed By Gunsmiths For Those Gunsmiths Who Love Solid, Fixed-blade Screwdrivers That Fit Their Gun Screws Right - And Simply Won't Have It Any Other Way!the Perfect Tip & Blade we Started With The Tip Of The Blade, The Part That Has...
    More....

    65\ 1911 Auto-type Slot Sight Base Files 6" 65 Degree Sight Base File #1 Cut : Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    65\ 1911 Auto-type Slot Sight Base Files 6" 65 Degree Sight Base File #1 Cut : Gunsmith Tools & Supplies by Brownells for Gun & Rifle

    USD 34,99 (Indicative price - actual current price possibly lower)

    Gunsmith Tools & Supplies by Brownells for Gun & Rifle
    Designed Especially For Widening And Final Fitting After Using Our 65β° Sight Base Cutter To Cut The Basic Slot. Or, Can Open Up A 60β° Slot To Proper 65β° Angle If Changing To A New Sight Design. Has True Parallel Cutting Edges For Precision Filing, Giving You Full Control Over The Angle Of The Dovetail.
    More....






  • FROM SAME CATEGORY : Gunsmith Tools & Supplies by Brownells for Gun & Rifle : click here!

  • PRODUCT LIST : by product category : click here!


  • 307-1










    Try Search on this site - find exactly what you need!




    Item on this page: 1911 Auto Front Sight Staker Swage Point (870 / 1100 & F.s. Staker) : Gunsmith Tools & Supplies by Brownells for Gun & Rifle



    Home Page Search Products Contact Us Privacy Policy



    Copyright © GrandGunParts.com : 1997 - 2018 : All rights reserved. 140-FT